Mixing Tips – Delay
Mixing Tips – Delay
In this quick tutorial we’re going to demonstrate a bit of processing we used in the verse section of song recorded at Signature Sound Studio.
PROCESSING:
Before adding the delay we applied a bit of EQ to give the voice a bit more presence. I cut the low end around 180HZ and I enhanced the mid-highs to about 2.8 to 3 kilohertz. Then I also raised some frequencies about 15 kilohertz to give it some “air”, which gives it a bit more smoothness. I also cut the low end to 50hertz to eliminate noises under that frequency. I then used some compression and a DeEsser (to eliminate all the sibilance on the S’s). To hear how we used the delay, make sure to watch the video above.
SIGNATURE SOUND POSTS
CHOOSE CATEGORY
CHOOSE CATEGORY POST